[NSRCA-discussion] Entropy control throws
Eddie Batchelor
perkinsrx at centurytel.net
Wed Jun 14 18:14:58 AKDT 2006
Lance
I can do degrees. <g>
It's a used plane, no instructions and I lost the owners email
Thanks
Eddie
_____
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Lance Van
Nostrand
Sent: Wednesday, June 14, 2006 6:52 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Entropy control throws
I do it by degrees. The instructions should have this info, but I recommend
15 degrees elv and ail, 35 degrees rudder
--Lance
----- Original Message -----
From: Eddie <mailto:perkinsrx at centurytel.net> Batchelor
To: NSRCA Discussion <mailto:nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, June 14, 2006 10:09 AM
Subject: [NSRCA-discussion] Entropy control throws
I am finally about to get my Entropy flying ( hopefully in time for
Nederland).
I am thinking of starting with control throws similar to what I flew on my
Explorer(Excelleron) I.E.
Rudder low rate 20-30mm High rate full deflection
Elevator "" "" 10-15mm "" ''" 20 -25mm
Aileron "" "" 10-15mm "" "" 20 -25mm
I'd appreciate any input from anyone who's familiar with the Aeroslave
Entropy.
I am running out of time and probably won't have many trim flights before
Nederland <G>
TIA
Eddie
_____
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060615/f8dd6b79/attachment.html
More information about the NSRCA-discussion
mailing list