[NSRCA-discussion] Part # needed for OS 1.60FX -- PressureTapNipple (resend)

[John Pavlick]

MessageYup, that's the one I used. Also fits the 160Fx fuelie. I don't have
any spares - that reminds me, probably wouldn't be a bad idea to get one...

John Pavlick
http://www.idseng.com


  -----Original Message-----
  From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Anne et Xavier
  Sent: Saturday, June 10, 2006 3:02 PM
  To: John at ne-aero.com; 'NSRCA Mailing List'
  Subject: Re: [NSRCA-discussion] Part # needed for OS 1.60FX --
PressureTapNipple (resend)


  I used the p/n 29407300 from the OS140RX EFI
  Xavier

    -----Original Message-----
    From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Marien
    Sent: June 10, 2006 2:36 PM
    To: nsrca-discussion at lists.nsrca.org
    Subject: Re: [NSRCA-discussion] Part # needed for OS 1.60FX -- Pressure
TapNipple (resend)


    Hi all,



    I’m looking for the part number of the special OS Nipple used to take
pressure off of the crankcase on an OS 1.60FX motor.  I’m hooking up a Perry
Pump through the Upper Left rear-plate bolt and now need the special tap
that replaces the bolt.  But I have to know what it is in order to order it.
Better yet, if anyone has one they are not planning on using anytime soon .
. .



    Take care,

    John



--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.3/360 - Release Date: 6/9/06
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060610/c5a08610/attachment.html