[NSRCA-discussion] CA for foamies

[adriancwong at earthlink.net]

Thanks for all the reply.

Adrian



-----Original Message-----
>From: Ron Van Putte <vanputte at cox.net>
>Sent: Jan 25, 2006 8:26 AM
>To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>, adriancwong at earthlink.net
>Subject: Re: [NSRCA-discussion] CA for foamies
>
>
>On Jan 25, 2006, at 2:01 AM, adriancwong at earthlink.net wrote:
>
>> I'm building a foamy by using foam safe CAs.
>>
>> Would like to know is it ok to use any accelerator on the CA, or 
>> whether there is one just for foams?
>
>Balsa Products (www.balsapr.com) sells CA (thin, medium, thick) and 
>accelerator for non-foam applications.  They also sell CA (thin, 
>medium) and accelerator for foam applications.  Good stuff.
>
>Ron Van Putte
>