[NSRCA-discussion] Servo mounting tip

[John Pavlick]

Cool. I didn't know about these. I've always had the Futaba parts sitting
around so that's what I use. Lighter + cheaper is always good. I'll have to
give some of these a try. Thanks for the tip.

John Pavlick
http://www.idseng.com


> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of
> Park, Ihncheol
> Sent: Sunday, January 22, 2006 7:32 PM
> To: 'NSRCA Mailing List'
> Subject: Re: [NSRCA-discussion] Servo mounting tip
>
>
> John,
>
> http://www.horizonhobby.com/Shop/ByCategory/Product/Default.aspx?P
> rodID=JRPA
> 244
>
> http://www.horizonhobby.com/Shop/ByCategory/Product/Default.aspx?P
> rodID=JRPA
> 246
>
> I am using the 244 with from JR for my elevator servo ds8231.  246 is for
> mid size servo. It's is lighter & cheaper than the FUTM2680.
>
> Ihncheol Park
> P & A Hobbies
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
> John Pavlick
> Sent: Saturday, January 21, 2006 11:01 PM
> To: NSRCA Discussion
> Subject: [NSRCA-discussion] Servo mounting tip
>
> I thought some people might be interested in this. If you have to mount an
> elevator servo on its side, you might like to know that the
> Futaba #FUTM2680
> vertical servo mount also fits standard size JR (digital) servos.
> The only thing I had to do was change the grommets on the servo. The JR
> grommets are a little too thick. It's probably not the lightest way to do
> this, but it certainly is quick and easy.
>
> John Pavlick
> http://www.idseng.com
>

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.21/236 - Release Date: 1/20/06