[NSRCA-discussion] Servo mounting tip

[Park, Ihncheol]

John,

http://www.horizonhobby.com/Shop/ByCategory/Product/Default.aspx?ProdID=JRPA
244 

http://www.horizonhobby.com/Shop/ByCategory/Product/Default.aspx?ProdID=JRPA
246

I am using the 244 with from JR for my elevator servo ds8231.  246 is for
mid size servo. It's is lighter & cheaper than the FUTM2680.  

Ihncheol Park
P & A Hobbies
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Pavlick
Sent: Saturday, January 21, 2006 11:01 PM
To: NSRCA Discussion
Subject: [NSRCA-discussion] Servo mounting tip

I thought some people might be interested in this. If you have to mount an
elevator servo on its side, you might like to know that the Futaba #FUTM2680
vertical servo mount also fits standard size JR (digital) servos.
The only thing I had to do was change the grommets on the servo. The JR
grommets are a little too thick. It's probably not the lightest way to do
this, but it certainly is quick and easy.

John Pavlick
http://www.idseng.com

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.21/236 - Release Date: 1/20/06

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion