[NSRCA-discussion] Fuel Soaked Balsa

[John Ferrell]

Full strength Clorox Bleach. 
It will dissolve the oil. It will also put white spots on your clothing and remove oil from nearby steel parts allowing early rust!

It raises the grain a little but otherwise leaves no trace after the water dries out. 
Best used outside.

John Ferrell    
http://DixieNC.US

  ----- Original Message ----- 
  From: Erik Newsholme 
  To: NSRCA 
  Sent: Sunday, January 22, 2006 12:06 PM
  Subject: [NSRCA-discussion] Fuel Soaked Balsa



  Trying to recover the bottom of a Focus II.  Problem is fuel soaked balsa is not letting the covering stick. 

  Looking for a way to treat the wood to get the oil out it so the covering will stick.


  Erik Newsholme
  bladesmith at mindspring.com




------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060122/5e4e1a8c/attachment-0001.html