[NSRCA-discussion] 14 mZ

[Robert & Casey Green]

Thanks for your input Verne
  ----- Original Message ----- 
  From: Verne Koester 
  To: NSRCA Mailing List 
  Sent: Thursday, January 05, 2006 4:24 PM
  Subject: Re: [NSRCA-discussion] 14 mZ


  I can't recall the specifics, but I CAN tell you you will end up doing a LOT more programming if you assign the servos the old way. It can show up in a mix you decide to try later and in other ways. Your life will be much simpler if you just plug the servos into the channels they suggest.

  Verne
    ----- Original Message ----- 
    From: Robert & Casey Green 
    To: discussion at nsrca.org 
    Sent: Thursday, January 05, 2006 10:25 AM
    Subject: [NSRCA-discussion] 14 mZ


    Anyone using the 14MZ the way futaba wants you to use it i.e. 1 throttle, 2 rudder etc.  If yes what has been your opinion; and if no do you notice any difference using the old ,method - 1, aileron, 2 elevator, 3 throttle etc.


    Thanks in advance!


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20060105/280e2cb2/attachment.html