[NSRCA-discussion] Fact/Rumor?

Ron Van Putte vanputte at cox.net
Mon Feb 27 06:44:52 AKST 2006


On Feb 27, 2006, at 8:55 AM, Rick Kent wrote:

> Would that friend's name be Larry?
>
> If so, anyone interested in the details can read all about it here.  
> http://www.rcgroups.com/forums/showthread.php? 
> t=458314&page=48#post5099686
>
> If it isn't, then this guy Larry's already done all the hard work.  
> In the interest of full disclosure, I was the one of the major  
> posters who were raising the question in the thread about FCC  
> legality. Not so much because I believed it was illegal or even  
> dangerous, but to make 100% SURE it wasn't--before a slew of folks  
> went out and hacked up their 6102's..
>
> The AMA, as of right now, has taken the stance that it is illegal,  
> and therefore does not sanction the modification. You can read the  
> AMA Technical Director's comments on it in the thread.
>
> FWIW, I emailed Tony Stillman myself several weeks ago about this  
> modification. He seemed to think it was within FCC rules.  
> Apparently the AMA and he are at odds on this. We'll have to wait  
> and see how the testing pans out. Hopefully the AMA will take  
> another look if all goes well.

The name of the guy I'm talking with is not Larry.  However, my  
friend is going to share the cost of having the test done with  
another person (Larry?).

  AMA's Technical Director is making FCC regulation interpretations  
for the FCC?

Ron Van Putte

>
> -------Original Message-------
>
> From: Ron Van Putte
> Date: 02/26/06 11:27:01
> To: Cameron Smith; NSRCA Mailing List
> Subject: Re: [NSRCA-discussion] Fact/Rumor?
>
> On Feb 25, 2006, at 10:13 AM, Cameron Smith wrote:
>
> > Have you asked Tony what he has heard? That would be great IF this
> > was a
> > option.
>
> I sent an e-mail to Tony Stillman and am awaiting his response.
>
> BTW, I thought the following might be of interest to some followers
> of the List.  A friend of mine is an electrical engineer and he likes
> to do electronic modifications to his radio equipment.  He bought one
> of the Specktrum systems and took the back off the transmitter.
> Based on what he saw, he ordered a JR 6102 transmitter and installed
> the Specktrum RF module in it.  Here's the interesting fact:  He says
> that the RF module appears to have been designed for the JR 6102,
> because the predrilled holes in the board match up to the back of the
> 6102 and all he had to do was screw the board down and solder three
> wires.  He's now using the modified 6102 transmitter with the
> Spectrum receiver.  For those who might scream that this modification
> invalidates the FCC type certification of the system, he responds
> that the FCC regulations say that he can do what he's done if he gets
> the modified transmitter tested at a certified testing station.
> There is such a station in Georgia and he plans to have his
> transmitter tested there next week, on this way to the Southeastern
> Model Show in Perry, GA.  Once he does this, other qualified
> individuals can legally perform the same modification.  Interesting.
>
> Ron Van Putte
>
> >
> > -----Original Message-----
> > From: nsrca-discussion-bounces at lists.nsrca.org
> > [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of  
> Ron Van
> > Putte
> > Sent: Saturday, February 25, 2006 10:00 AM
> > To: NSRCA Mailing List
> > Subject: [NSRCA-discussion] Fact/Rumor?
> >
> > I heard that Futaba is planning to market a transmitter module which
> > will plug in the high-end Futaba transmitters, enabling  owners to
> > use their transmitters with the Spektrum 2.4 GHz receiver.  Is it
> > more than a rumor?
> >
> > Ron Van Putte
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> <IMSTP.gif>
> <IMSTP.gif>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060227/6c77efad/attachment.html 


More information about the NSRCA-discussion mailing list