[NSRCA-discussion] Fuel leak

[Glen Watson]

Adrian,

I had a similar seepage issue with a DZ140.  I discovered the wrist pin
access plug, item #83 on the DZ160 parts list was not seated properly.

Just another item to check if you hadn't already done so.

Take care,

Glen

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
adriancwong at earthlink.net
Sent: Monday, December 25, 2006 8:40 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Fuel leak

Merry X'Mas to all.

I have a 160 DZ suddenly developed a fuel leak on the back of the engine
between the back plate, the carburetor, and the carburetor body. Originally,
I thought it might be the gaskets. I installed all three new gaskets and the
problem persited. I put it on an engine stand this afternoon, and noticed
raw fuel was pouring out from the back plate and the throttle body as soon
as the engine started to run. 

Is there any chances I can put something backwards that can cause the
problem?

Thanks in advance for your help.

Adrian 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion