[NSRCA-discussion] plane storage

John Ferrell johnferrell at earthlink.net
Fri Dec 22 05:23:50 AKST 2006


You don't need an aluminum tube to hang it, a wooden dowel works fine...

John Ferrell    W8CCW
"My Competition is not my enemy"
http://DixieNC.US

----- Original Message ----- 
From: "Grow Pattern" <pattern4u at comcast.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, December 20, 2006 2:02 PM
Subject: Re: [NSRCA-discussion] plane storage


>I have seen the wing-tube used with success. Often an old tube can be cut 
>in
> half and used as the cross-bar. The same tube was also used in a field and
> transport rack making it a complete "system".
>
> Regards,
>
> Eric.
>
> ----- Original Message ----- 
> From: "JShulman" <jshulman at cfl.rr.com>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Sent: Tuesday, December 19, 2006 2:47 PM
> Subject: Re: [NSRCA-discussion] plane storage
>
>
>> Why not hang it from the gear or wing tube socket then so you don't
>> stretch
>> your mount?
>>
>> Regards,
>> Jason
>> www.jasonshulman.com
>> www.shulmanaviation.com
>> www.composite-arf.com
>>
>> -----Original Message-----
>> From: nsrca-discussion-bounces at lists.nsrca.org
>> [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of wgalligan
>> Sent: Tuesday, December 19, 2006 2:41 PM
>> To: NSRCA Mailing List
>> Subject: Re: [NSRCA-discussion] plane storage
>>
>>
>> Hang it by the prop and you wont have any drain back from the pipe.  The
>> prop/motor/mount is tougher then the tail feathers anyways.  Done this 
>> for
>> years and have not had any problems
>>
>> Wayne Gallligan
>>
>>
>> ----- Original Message -----
>> From: "Richard Strickland" <richard.s at allied-callaway.com>
>> To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
>> Sent: Tuesday, December 19, 2006 10:50 AM
>> Subject: Re: [NSRCA-discussion] plane storage
>>
>>
>>> I've always stored them top side up--in a cradle--on a wall dedicated to
>>> airplanes in the garage--(2) 18" brackets each.  Takes a lot of 
>>> room--but
>>> I
>>> don't like to think of stuff draining back in to the engine in vertical
>>> storage. The smaller stuff in a similar fashion on two 2 X 4" stanchions
>>> in
>>> a stand with adjustable wall hangers both sides and the 12" shelf
>>> brackets
>>> covered with pipe insulation foam products.  I suppose with the E stuff,
>>> the
>>> electrons won't gum up the motors as bad....but old dogs...
>>>
>>> RS
>>>
>>> -----Original Message-----
>>> From: nsrca-discussion-bounces at lists.nsrca.org
>>> [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Tim
>>> Wortkoetter
>>> Sent: Tuesday, December 19, 2006 10:18 AM
>>> To: NSRCA Mailing List
>>> Subject: [NSRCA-discussion] plane storage
>>>
>>>
>>> Is it better to store the plane on its side or on the
>>> bottom.  it horizontal stab vertical or horizontal.  I
>>> don't know if it would effect the fuse and cause it to
>>> warp or sag if it sits for an extended period of time.
>>>
>>>
>>> Thanks,
>>> Tim
>>>
>>> __________________________________________________
>>> Do You Yahoo!?
>>> Tired of spam?  Yahoo! Mail has the best spam protection around
>>> http://mail.yahoo.com
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.409 / Virus Database: 268.15.25/593 - Release Date:
>> 12/19/2006
>>
>> --
>> No virus found in this outgoing message.
>> Checked by AVG Free Edition.
>> Version: 7.1.409 / Virus Database: 268.15.25/593 - Release Date:
>> 12/19/2006
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 




More information about the NSRCA-discussion mailing list