[NSRCA-discussion] WOW - Brio maiden

Dean Pappas d.pappas at kodeos.com
Fri Dec 15 05:55:20 AKST 2006


Nat,
You're absolutely right! That's why you should pick up a copy of February's Flyng Models.
I still wish we'de had a backwards crank for an OS FSR to test in a Phoenix 8 with the same issue.

Dean

Dean Pappas
Sr. Design Engineer
Kodeos Communications
111 Corporate Blvd.
South Plainfield, N.J. 07080
(908) 222-7817 phone
(908) 222-2392 fax
d.pappas at kodeos.com


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Nat Penton
Sent: Thursday, December 14, 2006 11:10 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] WOW - Brio maiden


Kelly
Contra rotating props would solve the knife edge trim needs. Congratulations 
you have a straight airplane.  Nat

----- Original Message ----- 
From: "Kelly Regan" <kelly.regan2 at verizon.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, December 14, 2006 8:43 PM
Subject: [NSRCA-discussion] WOW - Brio maiden


> All I can say is WOW !!!
>
> I flew the Brio today and what a blast!  The first flight was pretty
> much uneventful. A couple clicks here and there and the plane flew
> great!  The OS 140 has PLENTY of power and started right up!
>
> During the second flight after about 8 minutes the pipe slipped out
> of the coupler and I had to land. A little rough, with a bounce but no
> damage. The rudder is so sensitive that I over corrected a bit
> and the nose dropped down suddenly and I touched down a little
> harder then I would like.
>
> The third flight was all joy! I fixed my pipe problem and I could not
> believe how nice and smooth this plane made me look!
>
> A few things that jumped out that need trimming...
>
> The balance seems fine at 8" from the leading edge at the root.
>
> It seems to have a bit to much right thrust with the 16.5 x 12 2 blade
> prop but I think that can be mixed out for now until I see how it acts
> with other props.
>
> In knife edge going right with the canopy facing me it pushes a bit to
> the wheels. In knife edge going left with the canopy facing me it
> pulls just a little to the canopy.
>
> I will start working my way through the trimming guide next time out.
>
> Thanks again for everyones help!
>
> -- 
> ______________________________________________
>
> Kelly Regan
> www.reganbrothers.com
> Home Page: http://mysite.verizon.net/vze6uror/
> ______________________________________________
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date: 
> 10/31/2006
>
> 



-- 
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date: 10/31/2006

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



More information about the NSRCA-discussion mailing list