[NSRCA-discussion] HIttec

[Michael Ramsey]

You'll have to use a Y-Harness or a pair of their programmable digital
servos (you can then adjust the swing, center, and direction). The Hitec
radios currently available don't have dual elevator mixing (channel
mixing) that connects the slave channel to the master (elevator) trim
lever.
 
Mix and match servos until two have the same mechanical "center" then
the servos should track fairly closely. Start out with new servos as
used ones have been broken-in differently.
 
Michael Ramsey

________________________________

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of R. LIPRIE
Sent: Tuesday, December 12, 2006 7:29 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] HIttec


Everyone my uncle mike has a hitecc radio he is trying to work with it
is a 6 channel.  And he is trying to get the elevators sincked out. But
something in the radio is adding a mix.  SO if anyon ehas an details
please let me know so I can tell him.
 
Matthew Liprie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061213/fd2337ad/attachment.html