[NSRCA-discussion] ] servo question again

[Ed Alt]

If they have standard 8411's, you could just get the nylon replacement gears 
and roll your own SA.  I did that with all the 8411's I used to use on the 
IMAC stuff I had.  Another option might be to pick up the 8311, which is an 
8411 with a different motor. It has slightly less torque, and is plenty 
quick. It was a re-tooling to work on heli tail rotors, which were burning 
up the 8411's sometimes with all the incessant dithering that goes on in 
that application.

Ed

----- Original Message -----
From: "Kelly Regan" <kelly.regan2 at verizon.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, December 05, 2006 4:44 PM
Subject: Re: [NSRCA-discussion] ] servo question again

> Thanks guys,
> I went with 9411SA on the ailerons and 8411SA on the rudder and elevator.
> Unfortunately horizon, central, and Don's hobby are out of stock on the
> 8411SA's.  JR is saying end if December.
>
>
> Park, Ihncheol wrote:
>> I agree with Anthony 100%.  I am using one as a test in a small pattern
>> plane.  There isn't any servo that compares to the Airtronics 94758
>> You have to get used to the speed of this servo for the couple of 
>> flights.
>> I am also using Futaba 9650 for 50/60 size planes.
>>
>> Ihncheol Park
>> P & A Hobbies
>>
>>
>> -----Original Message-----
>> From: nsrca-discussion-bounces at lists.nsrca.org
>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Anthony
>> Romano
>> Sent: Tuesday, December 05, 2006 8:06 AM
>> To: nsrca-discussion at lists.nsrca.org
>> Subject: [NSRCA-discussion] ] servo question again
>>
>> Hi Ed,
>> The 8417 is the servo you are thinking of 82 oz of torque @ .10sec/60 
>> deg.
>> My choice for the elevator or rudder for that matter is an Airtronics 
>> 94758.
>>
>>    115 oz .06sec/60 deg. on 6 volts not sure what voltage JR rates their
>> servos at.
>>
>> Anthony
>>
>>
>>
>>> From: "Ed Alt" <ed_alt at hotmail.com>
>>> Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>>> To: <NSRCA-discussion at lists.nsrca.org>
>>> Subject: Re: [NSRCA-discussion] servo question again
>>> Date: Mon, 4 Dec 2006 22:59:07 -0500
>>>
>>> Kelly:
>>> I would suggest the 8411SA on the rudder.  It will also handle the
>>> elevator nicely.  I think that Dave Lockhart uses something like an
>>> 8317 re-geared in some way for the elevator, but I can't remember his
>>> recipe for that exactly.
>>> Whatever he's doing, it's targeted at the best combination of speed and
>>> torque available from available product. I remember that the specs he
>>> quoted were definitely faster than what an 8411SA would deliver,
>>> although at less torque (plenty for the application though).  As I
>>> recall, the reason he does this is for that extra bit of speed to help
>>> get a cleaner break in pitch for snaps.
>>>
>>> Ed
>>>
>>> ----- Original Message -----
>>> From: "Kelly Regan" <kelly.regan2 at verizon.net>
>>> To: <NSRCA-discussion at lists.nsrca.org>
>>> Sent: Monday, December 04, 2006 10:43 PM
>>> Subject: [NSRCA-discussion] servo question again
>>>
>>>
>>>> Getting real close to flying time! ;)
>>>>
>>>> I have had good luck with the Hitec digital servo's in my large gas
>>>> planes but I think I want to try out some JR's for my Brio.
>>>>
>>>> Can I do 9411SA all around or should I do 9411SA on the ailerons and
>>>> 8411SA on the rudder and elevator (DEPS elevator)?
>>>>
>>>> I will be running a 2400 Lio-ion pack with a Fromco regulator.
>>>> maybe a bit overkill, but I already have it.
>>>>
>>>> Thank you for the help
>>>>
>>>> --
>>>> ______________________________________________
>>>>
>>>> Kelly Regan
>>>> www.reganbrothers.com
>>>> Home Page: http://mysite.verizon.net/vze6uror/
>>>> ______________________________________________
>>>>
>>>> _______________________________________________
>>>> NSRCA-discussion mailing list
>>>> NSRCA-discussion at lists.nsrca.org
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>
>> _________________________________________________________________
>> MSN Shopping has everything on your holiday list. Get expert picks by 
>> style,
>> age, and price. Try it!
>> http://shopping.msn.com/content/shp/?ctId=8000,ptnrid=176,ptnrdata=200601&tc
>> ode=wlmtagline
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>
>
> -- 
> ______________________________________________
>
> Kelly Regan
> www.reganbrothers.com
> Home Page: http://mysite.verizon.net/vze6uror/
> ______________________________________________
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>