[NSRCA-discussion] Nose-ring & new email

[Jim Woodward]

Yup - I thought so too.  But to my eye I really couldn't see it.  The
effect of this method just seemed to move the spinner up and down.
Jim
 
 

________________________________

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Fred
Huber
Sent: Monday, December 04, 2006 3:13 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Nose-ring & new email


That would also impart a small side-thrust....  since its only a few
degrees of ar you are moving the ring, it won't be much, but its there.

	----- Original Message ----- 
	From: Jim Woodward <mailto:Jim.Woodward at armorholdings.com>  
	To: NSRCA Mailing List <mailto:nsrca-discussion at lists.nsrca.org>

	Sent: Monday, December 04, 2006 12:04 PM
	Subject: [NSRCA-discussion] Nose-ring & new email

	Hi All,
	 
	I wanted to share something I did on my nose-ring the other
night that made a thrust adjustment pretty easy.  I need to add some
downthrust and using the Budd Mount (rotational dampening), I had to add
a shim under the motor mount to get the angle I wanted.  The angle
looked nice and actually centered the spinner a little better so I did
not feel the need to redrill for a new mount position (shim was fine).
However, the original nose-ring positon  stopping the small change from
taking place once everything was lined up.  So I wanted to redrill the
nose-ring attachment but when in the new position, the "new" position
was about 1/2 the diameter off the original holes.  I did not want to
"slot" the holes, so what was I to do?  
	 
	I found that if I used one of the original nose ring mounting
holes, I could position the motor where I wanted and the other "new"
hole was now about 2-diameter away from its original location.  Seeing
this, I simply measured and drilled only one side a new hole, and the
new thrust was set!  Easy to do and took just a short time.  
	 
	Thanks,
	Jim W.
	 
	PS - now at email jim.woodward at armorholdings.com  (previous
company was sold)
	 
	 
	 
	CONFIDENTIALITY NOTICE: This e-mail message, including any
attachments, is for the sole use of the intended recipient(s) and may
contain confidential and proprietary information.  Any unauthorized
review, use, disclosure or distribution is prohibited.  If you are not
the intended recipient(s), please contact the sender by reply e-mail and
destroy all copies of the original message. 

	
________________________________


	

	_______________________________________________
	NSRCA-discussion mailing list
	NSRCA-discussion at lists.nsrca.org
	http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

	
________________________________


	

	No virus found in this incoming message.
	Checked by AVG Free Edition.
	Version: 7.1.409 / Virus Database: 268.15.6/567 - Release Date:
12/4/2006
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061204/77ce9eaf/attachment.html