[NSRCA-discussion] Nose-ring & new email

[Fred Huber]

That would also impart a small side-thrust....  since its only a few degrees of ar you are moving the ring, it won't be much, but its there.
  ----- Original Message ----- 
  From: Jim Woodward 
  To: NSRCA Mailing List 
  Sent: Monday, December 04, 2006 12:04 PM
  Subject: [NSRCA-discussion] Nose-ring & new email


  Hi All,

  I wanted to share something I did on my nose-ring the other night that made a thrust adjustment pretty easy.  I need to add some downthrust and using the Budd Mount (rotational dampening), I had to add a shim under the motor mount to get the angle I wanted.  The angle looked nice and actually centered the spinner a little better so I did not feel the need to redrill for a new mount position (shim was fine).  However, the original nose-ring positon  stopping the small change from taking place once everything was lined up.  So I wanted to redrill the nose-ring attachment but when in the new position, the "new" position was about 1/2 the diameter off the original holes.  I did not want to "slot" the holes, so what was I to do?  

  I found that if I used one of the original nose ring mounting holes, I could position the motor where I wanted and the other "new" hole was now about 2-diameter away from its original location.  Seeing this, I simply measured and drilled only one side a new hole, and the new thrust was set!  Easy to do and took just a short time.  

  Thanks,
  Jim W.

  PS - now at email jim.woodward at armorholdings.com  (previous company was sold)



  CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and proprietary information.  Any unauthorized review, use, disclosure or distribution is prohibited.  If you are not the intended recipient(s), please contact the sender by reply e-mail and destroy all copies of the original message. 


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.1.409 / Virus Database: 268.15.6/567 - Release Date: 12/4/2006
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061204/dfc3f099/attachment.html