[NSRCA-discussion] glow igniter pos/neg

[JShulman]

Thanks for the info Jim... and keep on practicing. Went out today with Joe
and Ryan and Ryan was doing the Rolling S (F-07) the same roll direction. I
thought it was just a 1 or 2 miss, but he kept doing it. I brought it up and
he had to do another with the same roll just to make sure...lol.

Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of
jivey61 at bellsouth.net
Sent: Sunday, August 20, 2006 12:41 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] glow igniter pos/neg


Jason
Normally the tip of the plug is positive(red wire) and case is neg or
ground(blk wire).However it does not matter to the plug. It will light
either way.
You can measure continuity from the wire to the plug connector to be sure. A
voltmeter on the ohms scale.

Jim Ivey
P.S.  I rolled the wrong way again yesterday. I gotta fix that.
----- Original Message -----
From: "JShulman" <jshulman at cfl.rr.com>
To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, August 20, 2006 12:01 PM
Subject: [NSRCA-discussion] glow igniter pos/neg


> Which is the positive side of the wire, the side with the ridges or the
> smooth side.
>
> Regards,
> Jason
> www.jasonshulman.com
> www.shulmanaviation.com
> www.composite-arf.com
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion