[NSRCA-discussion] glow igniter pos/neg

[jivey61 at bellsouth.net]

Jason
Normally the tip of the plug is positive(red wire) and case is neg or
ground(blk wire).However it does not matter to the plug. It will light
either way.
You can measure continuity from the wire to the plug connector to be sure. A
voltmeter on the ohms scale.

Jim Ivey
P.S.  I rolled the wrong way again yesterday. I gotta fix that.
----- Original Message ----- 
From: "JShulman" <jshulman at cfl.rr.com>
To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, August 20, 2006 12:01 PM
Subject: [NSRCA-discussion] glow igniter pos/neg


> Which is the positive side of the wire, the side with the ridges or the
> smooth side.
>
> Regards,
> Jason
> www.jasonshulman.com
> www.shulmanaviation.com
> www.composite-arf.com
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion