[NSRCA-discussion] Hacker A60 back support pic

[Fred Huber]

Look at the picture of that original posting...

Think about my last posting and what I said about "torsional bracing". 
Thats EXACTLY what that big X gives.  Huge increase in resistance to 
twisting the front end with the motor bolted to both the ring and the X 
frame.
----- Original Message ----- 
From: "Chris Moon" <cjm767driver at hotmail.com>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Saturday, August 12, 2006 10:49 PM
Subject: [NSRCA-discussion] Hacker A60 back support pic


>I have attached a picture of my rear support made from a .064 carbon
> fiber flexplate and a flanged bearing to fit over the motor shaft.
> Weighs .6oz not counting the ply mounting tabs glued to the fuse.
>


--------------------------------------------------------------------------------


> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.10.9/417 - Release Date: 8/11/2006