[NSRCA-discussion] hyde ari(a) mount with built in nose ring

[Mike Hester]

yes. Just change the nose ring. the distance between the spinner backplate and the firewall can be slightly different but not much. Usually it just takes a wood plate as a shim and you're good to go.

-Mike

  ----- Original Message ----- 
  From: Glenn Hatfield 
  To: nsrca-discuss list 
  Sent: Tuesday, August 01, 2006 1:38 PM
  Subject: [NSRCA-discussion] hyde ari(a) mount with built in nose ring


  Are the hyde ari(a) mount with built in nose ring for the YS and OS interchangable?  Can I pull a YS on an hyde ari(a) mount with built in nose ring out of a model and but an OS140 on an hyde ari(a) mount with built in nose ring back in the model and get the prop washer line up?


  Randy Hatfield


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060801/e165385d/attachment.html