[NSRCA-discussion] hyde ari(a) mount with built in nose ring

[Pete Cosky]

You need to change the nose ring between OS and YS. 

I have a YS in my Focus on a ARI mount that originally was made for the OS. Dropped right in once I switched nose rings.
  ----- Original Message ----- 
  From: Glenn Hatfield 
  To: nsrca-discuss list 
  Sent: Tuesday, August 01, 2006 1:38
  Subject: [NSRCA-discussion] hyde ari(a) mount with built in nose ring


  Are the hyde ari(a) mount with built in nose ring for the YS and OS interchangable?  Can I pull a YS on an hyde ari(a) mount with built in nose ring out of a model and but an OS140 on an hyde ari(a) mount with built in nose ring back in the model and get the prop washer line up?


  Randy Hatfield


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060801/cdfa5b80/attachment.html