[NSRCA-discussion] Brio 10 balance and weights

[Ed Alt]

Tim:
With the the rudder in the cabin (pull-pull), E-flite 480 and now a TP 
3S2100 as far forward as possible, it balances right on the recommended 
starting point.  I can't fathom how it is possible to be that nose heavy, 
unless it is with a much heavier motor installed.

Ed
----- Original Message ----- 
From: "Tim Of Global Electronics, Ltd." <TJS at mail.global-electronics.com>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, April 23, 2006 3:04 PM
Subject: [NSRCA-discussion] Brio 10 balance and weights


>I just got mine last night.  The owner of the hobby store told me they
> built one the night before and it came in very nose heavy.  He suggested
> putting the rudder servo in the rear and shortening the nose where 
> possible.
>
> So my question is, those who have built a Brio, are they comming in nose
> or tail heavy?  And what are the weights you guys are seeing?
>
> Thanks
> Tim
>


--------------------------------------------------------------------------------


> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion