[NSRCA-discussion] Brio 10 Set up

[rcmaster199 at aol.com]

Ed, I am using 281's in Hybrid with a 10X-955 set of ears and I don't see what you describe
 
Matt 
 
-----Original Message-----
From: Ed Alt <ed_alt at hotmail.com>
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
Sent: Fri, 21 Apr 2006 01:44:49 -0400
Subject: Re: [NSRCA-discussion] Brio 10 Set up


I just finished setting everything up in my "minúsculo Brio".  I grudgingly decided to use the Spektrum.  REALLY wanted to use the 10SXII or 10X, but why buy another receiver.  I like my Spektrum for foamy work, but thinking ahead to having to finally learn how to do useful mixes, fake a rudder DR with a mix etc, get the switches working the way I want, I was being lazy and wanted to avoid it.  So I finally hit the books and have it configured right, the only important piece missing is no expo on rudder.  
 
I'm trying the "best recommended setup", i.e. the E-flite Park 480 1010Kv outrunner and the E-flite 40A ESC and starting out with TP 1320's.  Bench tests don't seem too envouraging re. how the vertical will fare with just a 1320, but we'll see.  Seems to sag fairly quickly and it might really need a 2100 pack. The weight is encouraging though and another 2 oz with a TP 2100 isn't going to matter much I guess.  I skipped their little plastic spinner and the all-up weight with Spektrum Rx and 4 JR 281's is 28.9 oz, at the low end of their recommended weight range of 28-34 oz.  I was suprised at how far forward I had to put the battery to achieve a 4" starting balance point from the LE.  It's as far forward as it can go.  Hoping to fly soon if the weather cooperates.
 
BTW, has anyone using the 281 digitals noticed that they are never 'happy'?  All of mine run through this cyclic little 'blit' where they can't help but try moving a step and then go back.  It's not an oscillation per se, there are several seconds or more between these 'blits' and it is competely unrelated to whether they are connected to a control surface or not and also unrelated to battery voltage to the receiver.  Also unrelated to receiver type or transmitter used, doing the same thing on a R955S as it does connected to a Spektrum receiver.  No relation to lead length either. It's just what they like to do apparently.  Anyone else seeing this?  Seems like a deadband value issue could be involved.
 
Ed
----- Original Message ----- 
From: Steven Maxwell 
To: NSRCA Mailing List 
Sent: Sunday, April 16, 2006 5:17 PM
Subject: Re: [NSRCA-discussion] Brio 10 Set up


 
 
Steven Maxwell
 
 
----- Original Message ----- 
From: 
To: nsrca-discussion at lists.nsrca.org
Sent: 4/16/2006 4:36:02 PM 
Subject: [NSRCA-discussion] Brio 10 Set up


Just wondering which motor, battery, ESC, prop to use on this aircraft.  Also I fly at 6000 msl.  Where would you buy all the accessories and aircraft.  TIA



_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060421/75596c72/attachment.html