[NSRCA-discussion] stall turn tail waggle
jonlowe at aol.com
jonlowe at aol.com
Mon Apr 3 05:26:09 AKDT 2006
-----Original Message-----
From: vicenterc at comcast.net
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>; NSRCA
Mailing List <nsrca-discussion at lists.nsrca.org>
Sent: Mon, 03 Apr 2006 11:15:50 +0000
Subject: Re: [NSRCA-discussion] stall turn tail waggle
Lynn,
I already did. I just removed the pump and use the white nylon
spacer and cut the pump screws to seal the holes. I installed the
pressure nipple in the middle of the white spacer. I use the Perry
pump and the engine is working fine with the OS 160 carburetor in my
old Hydeout. The original carburetor has too much pressure drop for
the Perry Pump. This was a quick fix and I already got the parts so I
can put back the engine as it was original.
Vicente Bortone
-------------- Original message --------------
From: "Lynn Burks" <rclen123 at adelphia.net>
Hello Bob: Off subject but is there anyone who makes a back plate for
the OS 140 so I can remove the pump, or some type of adaptation. Lynn
Burks
----- Original Message -----
From: Bob Pastorello
To: NSRCA Mailing List
Sent: Sunday, April 02, 2006 11:43 AM
Subject: Re: [NSRCA-discussion] stall turn tail waggle
Another thing... don't release the rudder "boing".... move the stick to
neutral. Be surprised how much difference that makes.
Bob Pastorello
www.rcaerobats.net
rcaerobob at cox.net
----- Original Message -----
From: Derek Koopowitz
To: 'NSRCA Mailing List'
Sent: Sunday, April 02, 2006 1:37 PM
Subject: Re: [NSRCA-discussion] stall turn tail waggle
Try holding in a little more rudder than "some rudder". Experiment
with how much - I usually hold quite a bit until the nose is pointing
straight down.
--------
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Wayne
Powell
Sent: Sunday, April 02, 2006 11:05 AM
To: 'NSRCA Mailing List'
Subject: [NSRCA-discussion] stall turn tail waggle
I"m trying to focus in on a few of the finer points in my maneuvers,
and I'm having a tough time eliminating the tail waggle or pendulum
effect of my stall turns. I've tried holding in some rudder, getting
out of the rudder as early as possible, etc to no avail.
Any tips on how to make this one sing?
Wayne Powell
--------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
--------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
Attached Message
From:Lynn Burks <rclen123 at adelphia.net>
To:NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
Subject:Re: [NSRCA-discussion] stall turn tail waggle
Date:Mon, 3 Apr 2006 05:44:55 +0000
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list