bending an aluminum header

[brian young]

Ive done something similar to NAT, except I used drywall screws w/ washers and screwed it to the leg of my work bench. That way I didnt have to run down the street and steel the stop sign.
 
If your going sideways with it Ive screw blocks to my bench and put the header in between...If you havent guessed I dont have a vise.

Nat Penton <natpenton at centurytel.net> wrote:
Chris, I bolt the header tightly to a heavy 5/32" aluminum plate ( road 
sign ) held in the vise. Heat with a Monocote gun and bend. Does not have 
to be too hot.Use a wood dowell for leverage. Have not had any problems with 
Mueller's headers. Nat

----- Original Message ----- 
From: "Chris Moon" 
To: 
Sent: Thursday, September 08, 2005 8:30 PM
Subject: bending an aluminum header


> Since we are on the topic of aluminum, what is the best way to make a 
> slight bend in an aluminum header? I need it to move maybe 1/4" to 3/8" 
> at the outlet end of the header. Thanks!
> Chris
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.10.18/89 - Release Date: 9/2/2005
>
> 



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.10.18/89 - Release Date: 9/2/2005

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050909/28a7afc5/attachment.html