bending an aluminum header

[Nat Penton]

Chris, I bolt the header tightly to a heavy 5/32" aluminum plate ( road 
sign ) held in the vise. Heat  with a Monocote gun and bend. Does not have 
to be too hot.Use a wood dowell for leverage. Have not had any problems with 
Mueller's headers.     Nat

----- Original Message ----- 
From: "Chris Moon" <cjm767driver at hotmail.com>
To: <discussion at nsrca.org>
Sent: Thursday, September 08, 2005 8:30 PM
Subject: bending an aluminum header


> Since we are on the topic of aluminum, what is the best way to make a 
> slight bend in an aluminum header?  I need it to move maybe 1/4" to 3/8" 
> at the outlet end of the header. Thanks!
> Chris
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.10.18/89 - Release Date: 9/2/2005
>
> 



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.10.18/89 - Release Date: 9/2/2005

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.