Body Filler

[Terry Brox]

Ken,
     If you go to a bodyshop supply company and ask for a product called 
"Flow Out" made by Evercoat. It is straight resin used to thin regular 
polyester body filler. Or, you can just get a 2 part polyester glazing 
putty. It is already pretty thin and is used in place of spot putty but has 
the qualities of body filler. Hope this helps, Terry
----- Original Message ----- 
From: "Ken Velez" <kvelez at comcast.net>
To: <discussion at nsrca.org>
Sent: Wednesday, October 05, 2005 4:30 PM
Subject: Body Filler


>  Hello list, has anyone tried to thin out Bondo body filler to be able to
> apply thinner coats without affecting the drying time. TIA.
>
> Ken Velez
>
> =================================================
> If you want your reply email to go to the list, you must Cc: the list!
>
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.10/119 - Release Date: 10/4/2005
>
> 

=================================================
If you want your reply email to go to the list, you must Cc: the list!

To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.