Body Filler

[Pete Cosky]

If I'm not mistaken (and I very well may be) Bondo is a polyester resin
and I don't think it can be thinned, maybe one of the chemical engineers
would like to weigh in on this.

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Ken Velez
Sent: Wednesday, October 05, 2005 5:30 PM
To: discussion at nsrca.org
Subject: Body Filler

  Hello list, has anyone tried to thin out Bondo body filler to be able
to
apply thinner coats without affecting the drying time. TIA.

Ken Velez

=================================================
If you want your reply email to go to the list, you must Cc: the list!

To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the
list.

=================================================
If you want your reply email to go to the list, you must Cc: the list!

To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.