need plane

[Mike Darr]

Ken,

Hindsight is 20/20.  Let me know when you need some help.

Mike



----- Original Message -----
From: "Ken Thompson III" <mrandmrst at comcast.net>
To: <discussion at nsrca.org>
Sent: Thursday, May 26, 2005 10:36 AM
Subject: Re: need plane


> Thanks Mike,
>
> I think I have 3 of those sets.  I won't get rid of the fuse, even though
I
> broke the stab trying to remove it.  I ordered one of those also.
> I should have left well enough alone.
>
> Ken
> ----- Original Message -----
> From: "Mike Darr" <mdarr00 at comcast.net>
> To: <discussion at nsrca.org>
> Sent: Thursday, May 26, 2005 8:52 AM
> Subject: Re: need plane
>
>
> > Ken,
> >
> > I use the Du-Bro 4-40 pull-pull kit.  That is all you need.
> >
> > If you need any help let me know.  Don't get rid of that fuse, it can be
> > fixed.
> >
> > Mike
> >
> >
> >
> > ----- Original Message -----
> > From: "Ken Thompson III" <mrandmrst at comcast.net>
> > To: <discussion at nsrca.org>
> > Sent: Thursday, May 26, 2005 7:12 AM
> > Subject: Re: need plane
> >
> >
> >> I may take you up on that Mike, with the new fuse though.  I should
have
> > it
> >> tomorrow.  I have already stripped the old one so I'm not worried about
> > that
> >> fuse.  I will probably get a hold of you for the new pull-pull setup.
> >> I'm
> >> going to use Dubro pull-pull hardware and your way of doing the cables.
> >> I'll just need to know what clevises and connectors you use.
> >> Thanks for the offer, I need all of the help I can get.
> >>
> >> I'm still going to get another plane in a trade, if I can, I want to
have
> > a
> >> backup.  Heck, I could sell half of my electric stuff and buy Andrew's
> >> plane:-)
> >>
> >> Ken
> >> ----- Original Message -----
> >> From: "Mike Darr" <mdarr00 at comcast.net>
> >> To: <discussion at nsrca.org>
> >> Sent: Thursday, May 26, 2005 6:42 AM
> >> Subject: Re: need plane
> >>
> >>
> >> > Ken,
> >> >
> >> > Give me that fuse, and I will fix it for you in time for the
Shootout.
> >> >
> >> > Mike
> >> >
> >> >
> >> >
> >> > ----- Original Message -----
> >> > From: "Ken Thompson III" <mrandmrst at comcast.net>
> >> > To: <discussion at nsrca.org>
> >> > Sent: Thursday, May 26, 2005 6:23 AM
> >> > Subject: need plane
> >> >
> >> >
> >> >> Good morning,
> >> >>
> >> >> I lost my Excelleron yesterday due to an untimely engine flameout,
and
> > me
> >> >> taking too long to make a decision on what I should do.
> >> >>
> >> >> I've ordered a replacement fuse, but I don't know if I will have
time
> > to
> >> > get
> >> >> it back together and trimmed before the first contest.
> >> >>
> >> >> Does anybody have a clean plane, maybe a 90 or a 120 size, that they
> >> >> would
> >> >> be willing to trade for a New in Box YS 160DZ?  I hate to get rid of
> > this
> >> >> motor, it was to go in a new plane for next season.  The motor is
> > pretty
> >> >> much all I have to work with, since I'm in the middle of a 30%
> >> >> Ultimate
> >> >> build, as well.
> >> >>
> >> >> I need something fast so I can get it finished and trimmed before
June
> >> > 11th.
> >> >>
> >> >> I would be willing to drive this weekend for pickup, but would
prefer
> >> >> somebody in D4, or close to it, just to limit the driving distance.
> >> >>
> >> >> Thanks to all for your consideration, and sorry if this is a misuse
of
> >> >> the
> >> >> list.
> >> >>
> >> >> Ken Thompson
> >> >> D4
> >> >>
> >> >> =================================================
> >> >> To access the email archives for this list, go to
> >> >> http://lists.f3a.us/pipermail/nsrca-discussion/
> >> >> To be removed from this list, go to
> > http://www.nsrca.org/discussionA.htm
> >> >> and follow the instructions.
> >> >>
> >> >> List members email returned for mailbox full will be removed from
the
> >> > list.
> >> >>
> >> >>
> >> >
> >> >
> >> > =================================================
> >> > To access the email archives for this list, go to
> >> > http://lists.f3a.us/pipermail/nsrca-discussion/
> >> > To be removed from this list, go to
> >> > http://www.nsrca.org/discussionA.htm
> >> > and follow the instructions.
> >> >
> >> > List members email returned for mailbox full will be removed from the
> >> > list.
> >> >
> >>
> >> =================================================
> >> To access the email archives for this list, go to
> >> http://lists.f3a.us/pipermail/nsrca-discussion/
> >> To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> >> and follow the instructions.
> >>
> >> List members email returned for mailbox full will be removed from the
> > list.
> >>
> >>
> >
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> > List members email returned for mailbox full will be removed from the
> > list.
> >
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the
list.
>
>


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.