AeroFly sim transmitter?

[jonlowe at aol.com]

Can you please send me your latest setup file?
 
Thanks!
 
Jon Lowe 
 
-----Original Message-----
From: Bob Pastorello <rcaerobob at cox.net>
To: discussion at nsrca.org
Sent: Fri, 20 May 2005 05:44:56 -0500
Subject: Re: AeroFly sim transmitter?


I have a Smaragd that I've shared with a few guys here.  If you like, I can send you the zip file to create the folder.  It's pretty highly-tweaked from the stock version to fly much more like a real pattern airplane.

Bob Pastorello
www.rcaerobats.net
rcaerobob at cox.net
----- Original Message ----- 
From: Lance Van Nostrand 
To: discussion at nsrca.org 
Sent: Thursday, May 19, 2005 10:19 PM
Subject: Re: AeroFly sim transmitter?


Got my s/w today and installed it.  Very nice, and besides the Smaragd there's helis, jets, etc.  It's like getting the GP with the add-on packs.  I understand you can even download planes designed by others or design your own. More than I need now.
 
My question is how to best set it up for pattern practice. I think I heard that box markers can be set.  Also, I haven't found a view that gives me the pilots box perspective so I can actually fly parallel to the flight line and in the box.  Any suggestions?
 
--Lance
 
----- Original Message ----- 
From: AtwoodDon at aol.com 
To: discussion at nsrca.org 
Sent: Wednesday, May 11, 2005 7:38 PM
Subject: Re: AeroFly sim transmitter?


Lance, I just got Aerofly Pro myself and have been using an older Futabe 7UAP with no RF module in it for the TX.  Battery lasts forever without an RF load on it.  Works great and I am not wearing out my 'good' TX.  I am impressed by the 'feel' of Aerofly Pro compared to the older Realflight G2.  Have also tried the Realflight G3 and my vote goes for AFP.  The included Smaradg feels real good, actually snaps and spins and the out of the box setup is pretty close.  I increased the down elev throw a little and also bumped the rudder a little and that is all.  
 
Don
 
In a message dated 5/11/2005 5:31:27 P.M. Pacific Daylight Time, patterndude at comcast.net writes:
So I think I've seen that most everyone thinks the Ikarus AeroFly Pro simulator is good for pattern.  I'm thinking of getting a sim but I'm nervous about using my transmitter with the antenna down.  Don't want to overload the RF and I don't want to sit at my computer with a 3 foot antenna banging off my office furniture.  Oh, and I don't want to buy a new transmitter that lets me turn off the RF.  What are you all doing for a transmitter?
--Lance
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050520/e434c6e2/attachment.html