calling complete for new takeoff

[Don Ramsey]

The Judging Committee will have an advisory on this soon.  It was discussed 
this weekend with John Fuqua and the others committee members will be asked 
for an opinion shortly.

Don Ramsey
NSRCA Judging Committee Chairman
AMA 6096  NSRCA 1506
email:    don.ramsey at cox.net
website: http://members.cox.net/don.ramsey




----- Original Message ----- 
From: "Scott Smith" <js.smith at verizon.net>
To: "discussion" <discussion at nsrca.org>
Sent: Saturday, May 14, 2005 10:17 AM
Subject: RE: calling complete for new takeoff


> Good question Steve!  I believe you do have to call it, but when exactly
> does the takeoff finish, and the landing begin?
>
> According to 14.6:
>
> "14.6. In all classes, the contestant or helper must call out the 
> initiation
> and completion of the takeoff and landing maneuvers and all maneuvering 
> area
> entries and exits."
>
> So I guess after completing the downwind turn (last maneuver described in
> takeoff sequence) you call "takeoff complete", then a moment later 
> "entering
> the box"?
>
> Same with landing..."exiting the box...begin landing"...start the upwind
> turn?
>
> Should we also assume that failure to call box exit prior to landing would
> result in a 0 landing?
>
> "Failure to correctly call an entry or exit of the maneuvering area should
> result in a major downgrade of the maneuver immediately following the
> failure to call."
>
> And since it's 0 or 10....
>
> -----Original Message-----
> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org]On Behalf Of Steven Maxwell
> Sent: Saturday, May 14, 2005 10:31 AM
> To: discussion
> Subject: calling complete for new takeoff
>
>
> So I take it that under the new rules calling complete for takeoff isn't
> needed now because it would have to be done on the trim pass, same for
> starting the landing because of the procedure that has to be done now on
> both?
>
>
> Steven Maxwell
> patternrules at earthlink.net
> EarthLink Revolves Around You.
>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.