OXAI models

[Troy Newman]

You guys should go direct to Sam Johnson at Oxai-USA

The prices are all the same and Oxai USA knows what is in stock on a minute 
by minute basis. New models are coming in a few weeks. I know there are some 
on awaiting list.



http://www.oxai.us/

other contact info:

OXAI – USA
ONVACO (USA) INC. ---   OXAI-USA
6273 S.Huachuca Way
Chandler, AZ 85249
Attn: Sam Johnson
Phone: 480 664-1560
Fax:     480 664-1561
E-mail: scjohnson at cox.net


And for all you guys out there concerned about molded composite wings the 
Oxai wings are Balsa-Foam and "glassed" then painted...Flying they are 14oz 
a panel.  Fuse is constructed similar to the PL and Zn stuff except they 
don't use kevlar in them its a glass type at the rear CF at the nose....They 
are not painted in the mold, and the finish on them is awesome. All the 
models are just a little different in terms of finish. They are hand 
built-aligned-and finished.

Very high quality models.

I think the going price is around $2900. Drop your servos in Servo mounts 
are already installed. Put a Motor in it and go. It takes me about 10-15hrs 
to have them in the air. Of the Oxai models I have flown and have heard from 
others...all came off the bench nearly ready for competition. Mine took a 
minor tweak of incidence (positive Less than 1 turn) and a small amount of 
wing tip weight...8g. They come pre-aligned and set. Wings and stabs are 
adjustable and plug in.

Mine model was a prototype of the Pinnacle plug in wings and it is a little 
heavy compared to the newer ones. Mine weighs 10lbs 6oz right now. They are 
coming in now about 4-5oz less. This new weight is lighter than some of the 
molded models.

The model I have has a Hyde AR (A) mount in it. Single Elevator servo and 
the DEPS system Central Sells. Pipe is not CF but Hatori 699 ally pipe.

Very Good Model like others that are out there. The company in the USA is a 
very honest group and they are working hard to bring these models in below 
the costs other countries pay. If you convert the European price its close 
to $3500 plus shipping but we are getting them below $3000.

Give Sam a call if you are interested I think there are some model in this 
next shipment not spoken for. This will be the last shippment before the 
NATS.

Disclaimer is that I bought my models from them. Real Nice guys witha  good 
product.

Troy


>--- "Koenig, Tom" <Tom.Koenig at actewagl.com.au> wrote:
> >
> > Guys...what price are you fella's in the US paying
> > for the OXAI range ie Pinnacle, Diesel and
> > Impressions??
> >
> > Tom ( just wondering)
> >
> >
> >
>************************************************************************
> > *PLEASE NOTE*  This email and any attachments may
> > be confidential. If received in error, please delete
> > all
> > copies and advise the sender. The reproduction or
> > dissemination of this email or its attachments is
> > prohibited without the consent of the sender.
> >
> > WARNING RE VIRUSES:  Our computer systems sweep
> > outgoing email to guard against viruses, but no
> > warranty
> > is given that this email or its attachments are
> > virus free.
> > Before opening or using attachments, please check
> > for
> > viruses.  Our liability is limited to the re-supply
> > of any
> > affected attachments.
> >
> > Any views expressed in this message are those of the
> > individual sender, except where the sender
> > expressly,
> > and with authority, states them to be the views of
> > the
> > organisation.
> > ************************************************************************
>=================================================
>To access the email archives for this list, go to
>http://lists.f3a.us/pipermail/nsrca-discussion/
>To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>
>List members email returned for mailbox full will be removed from the list.
>


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.