91FX / Budd Mt.

[tony at radiosouthrc.com]

Nat:

I have over 300 flights without any problems on my mount, so I am pretty sure you won't have any issues either.

Not sure why you couldn't reach my site...  It seems to be working just fine for me here.


Tony Stillman
Radio South
3702 N. Pace Blvd.
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
  ----- Original Message ----- 
  From: Nat Penton 
  To: discussion at nsrca.org 
  Sent: Tuesday, May 03, 2005 7:53 PM
  Subject: 91FX / Budd Mt.


  Tony, I bench ran the 91FX/Budd mount. It was too stiff for the 91 and I removed the outer layer of rubber. Then it was too soft. I reinstalled the outer layer of rubber and secured it only on the back edge, somewhat like a clamp. Seems to be about right.

  The pucks are moulded nylon. Not sure how well the CA will remain bonded to the nylon.                Nat

  I could not reach your web site.


------------------------------------------------------------------------------


  Internal Virus Database is out-of-date.
  Checked by AVG Anti-Virus.
  Version: 7.0.308 / Virus Database: 266.10.3 - Release Date: 4/25/2005
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050504/863e9ddc/attachment-0001.html