MSoft Bashing now MZ Question

Cameron Smith dentdoc007 at adelphia.net
Tue May 3 03:03:52 AKDT 2005


The biggest difference I have noticed with with the Physical layout is I
rotate my ant. More down/forward in the gimbal to get it to balance more
like the WC2 used to hanging on the strap.
 Ergonomics are much smoother & they have styled away a lot of the edges
& ridges from the 9.
 
 (Personally I would trade a small child or Wife before I ditched a DA!)
   

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Ken Thompson III
Sent: Tuesday, May 03, 2005 6:44 AM
To: discussion at nsrca.org
Subject: Re: MSoft Bashing now MZ Question

To all MZ users,

Do you guys have enough time with your new radio to know if you are
going to 
be comfortable with the size yet?
I'm thinking about one, but it would cost me my new DA-150 and 4 8611's,
I'm 
still weighing the value.

Ken
----- Original Message ----- 
From: "Cameron Smith" <dentdoc007 at adelphia.net>
To: <discussion at nsrca.org>
Sent: Tuesday, May 03, 2005 6:29 AM
Subject: RE: MSoft Bashing now MZ Question


> If you are comfortable changing the spring's on the "Z" the 14 is a
CAKE
> WALK! Very strait forward. NO circuit boards, Harness bundles & such
to
> deal with.
>
> -----Original Message-----
> From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]
> On Behalf Of Ed Schummer
> Sent: Tuesday, May 03, 2005 12:01 AM
> To: discussion at nsrca.org
> Subject: Re: MSoft Bashing now MZ Question
>
> You'll have to get stiffer springs...
>
> Ed
>
>
> On 5/2/05 8:34 PM, "Koenig, Tom" <Tom.Koenig at actewagl.com.au> wrote:
>
>>
>> Speaking of which........ I'm still waiting, waiting, waiting for my
> MZ( our
>> distributor is a bit slooooooooooooow down here)
>>
>> Are the Gimbal springs a little stiffer on this radio...or will I
need
> to get
>> a set of Tony's H/D springs onto the sticks? I'm not too sure about
> pulling
>> this baby apart the minute I get it. The Zap never scared me..but
this
> one
>> might!!!
>>
>> Anyone...Tony?
>>
>> Tom
>>
>> -----Original Message-----
>> From: discussion-request at nsrca.org
>> [mailto:discussion-request at nsrca.org]On Behalf Of rick wallace
>> Sent: Tuesday, 3 May 2005 1:17 PM
>> To: discussion at nsrca.org
>> Cc: John Pavlick
>> Subject: MSoft Bashing / WAS RE: Microsoft Word help needed
>>
>>
>> Hey, now --
>>
>> Any OS that is used in a R/C transmitter can't be all bad, right?
>>
>> Btw, what's the count so far of Brand 'F' users of that 14 channel
Txt
> ht
>> have password protected themselves out of it.... ???
>>
>> Glad I'm not smart enough to know how to use one of them!
>>
>>
>>
>>
>
************************************************************************
>> *PLEASE NOTE*  This email and any attachments may
>> be confidential. If received in error, please delete all
>>
>> copies and advise the sender. The reproduction or
>>
>> dissemination of this email or its attachments is
>>
>> prohibited without the consent of the sender.
>>
>> WARNING RE VIRUSES:  Our computer systems sweep
>> outgoing email to guard against viruses, but no warranty
>>
>> is given that this email or its attachments are virus free.
>>
>> Before opening or using attachments, please check for
>>
>> viruses.  Our liability is limited to the re-supply of any
>>
>> affected attachments.
>>
>> Any views expressed in this message are those of the
>>
>> individual sender, except where the sender expressly,
>> and with authority, states them to be the views of the
>>
>> organisation.
>>
>
************************************************************************
>> ================================================To access the email
> archives
>> for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> List members email returned for mailbox full will be removed from the
> list.
>>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the
> list.
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the
list.

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.



More information about the NSRCA-discussion mailing list