MSoft Bashing now MZ Question

[Ken Thompson III]

To all MZ users,

Do you guys have enough time with your new radio to know if you are going to 
be comfortable with the size yet?
I'm thinking about one, but it would cost me my new DA-150 and 4 8611's, I'm 
still weighing the value.

Ken
----- Original Message ----- 
From: "Cameron Smith" <dentdoc007 at adelphia.net>
To: <discussion at nsrca.org>
Sent: Tuesday, May 03, 2005 6:29 AM
Subject: RE: MSoft Bashing now MZ Question


> If you are comfortable changing the spring's on the "Z" the 14 is a CAKE
> WALK! Very strait forward. NO circuit boards, Harness bundles & such to
> deal with.
>
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On Behalf Of Ed Schummer
> Sent: Tuesday, May 03, 2005 12:01 AM
> To: discussion at nsrca.org
> Subject: Re: MSoft Bashing now MZ Question
>
> You'll have to get stiffer springs...
>
> Ed
>
>
> On 5/2/05 8:34 PM, "Koenig, Tom" <Tom.Koenig at actewagl.com.au> wrote:
>
>>
>> Speaking of which........ I'm still waiting, waiting, waiting for my
> MZ( our
>> distributor is a bit slooooooooooooow down here)
>>
>> Are the Gimbal springs a little stiffer on this radio...or will I need
> to get
>> a set of Tony's H/D springs onto the sticks? I'm not too sure about
> pulling
>> this baby apart the minute I get it. The Zap never scared me..but this
> one
>> might!!!
>>
>> Anyone...Tony?
>>
>> Tom
>>
>> -----Original Message-----
>> From: discussion-request at nsrca.org
>> [mailto:discussion-request at nsrca.org]On Behalf Of rick wallace
>> Sent: Tuesday, 3 May 2005 1:17 PM
>> To: discussion at nsrca.org
>> Cc: John Pavlick
>> Subject: MSoft Bashing / WAS RE: Microsoft Word help needed
>>
>>
>> Hey, now --
>>
>> Any OS that is used in a R/C transmitter can't be all bad, right?
>>
>> Btw, what's the count so far of Brand 'F' users of that 14 channel Txt
> ht
>> have password protected themselves out of it.... ???
>>
>> Glad I'm not smart enough to know how to use one of them!
>>
>>
>>
>>
> ************************************************************************
>> *PLEASE NOTE*  This email and any attachments may
>> be confidential. If received in error, please delete all
>>
>> copies and advise the sender. The reproduction or
>>
>> dissemination of this email or its attachments is
>>
>> prohibited without the consent of the sender.
>>
>> WARNING RE VIRUSES:  Our computer systems sweep
>> outgoing email to guard against viruses, but no warranty
>>
>> is given that this email or its attachments are virus free.
>>
>> Before opening or using attachments, please check for
>>
>> viruses.  Our liability is limited to the re-supply of any
>>
>> affected attachments.
>>
>> Any views expressed in this message are those of the
>>
>> individual sender, except where the sender expressly,
>> and with authority, states them to be the views of the
>>
>> organisation.
>>
> ************************************************************************
>> ================================================To access the email
> archives
>> for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> List members email returned for mailbox full will be removed from the
> list.
>>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the
> list.
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.