Tru-Turn / O.S. adapter

[Ed Alt]

Don't know - I ended up just cutting mine with a dremel cutting wheel, then 
re-beveling the end. Done it twice, works fine.  Just clean the threads well 
to get rid of the grit.

Ed
----- Original Message ----- 
From: "John Pavlick" <jpavlick at idseng.com>
To: "NSRCA Discussion" <discussion at nsrca.org>
Sent: Monday, May 02, 2005 1:57 AM
Subject: Tru-Turn / O.S. adapter


> What's the correct Tru-turn spinner adapter to use for an O.S. 1.60 with a
> 3" FAI spinner / lightened backplate / APC 17x12 prop. The Tru-Turn part
> TT-0378-A doesn't work out of the box (too long).
>
> John Pavlick
> http://www.idseng.com
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.11.0 - Release Date: 4/29/05
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
> 
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.