Tru-Turn / O.S. adapter

[Grow Pattern]

At the WARM show TT said that they had a shorter one. Try calling them.

I just shorten mine for eth FAI spinners and re-cut the slot with a hacksaw. 
Never had an OS 1.60 kick a prop. The jam-nut is really just there to 
support the spinner.

Eric.


----- Original Message ----- 
From: "John Pavlick" <jpavlick at idseng.com>
To: "NSRCA Discussion" <discussion at nsrca.org>
Sent: Monday, May 02, 2005 1:57 AM
Subject: Tru-Turn / O.S. adapter


> What's the correct Tru-turn spinner adapter to use for an O.S. 1.60 with a
> 3" FAI spinner / lightened backplate / APC 17x12 prop. The Tru-Turn part
> TT-0378-A doesn't work out of the box (too long).
>
> John Pavlick
> http://www.idseng.com
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.11.0 - Release Date: 4/29/05
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.