6 meter interference - channel 03

[Jay Barcelo]

The 50Mhz RC portion is from 50.800 to 50.980Mhz and not 50.080 inside
the CW/RTTY/DX Window portion.

I fly on 50.900 (05) with no problems.

Jay, KP4DR
www.jaybarcelo.com



On Tue, 22 Mar 2005 13:12:36 -0600, Paul Horan <phoran at vvm.com> wrote:
> Del,
>     CW is very possible, the 50 Mhz RC freqs are right in
> the CW portion of 6 meters - 50 - 50.100 MHZ with
> the RC freqs 50.080 - 50.096 MHZ.  Worse yet that
> is the DX hound go for the long skip.
>     I have not seen any RC radios on 53 in many years,
> I still have my old Kraft 77.
>     It is also possible that I am catching the 2 harmonic
> of some CBer using a power mike and a full gallon linear.
>     Let me know if you have a source of 53 Mhz radio stuff.
> 
>     Is it still allowable in RC pattern contests ???
> 
> Thanks,
> Paul
> ----- Original Message -----
> From: "Del K. Rykert" <drykert2 at rochester.rr.com>
> To: <discussion at nsrca.org>
> Sent: Tuesday, March 22, 2005 12:45 PM
> Subject: Re: 6 meter interference - channel 03
> 
> > Paul..
> >    Being a Ham and aware that some Hams do use the 50mhz band you may have
> > a ham using it for digi-peating or even cw. If you really want to bother
> > with the trouble shooting effort you can get yourself a directional 50mhz
> > handheld antenna and track down the source. After all that effort doesn't
> > mean it will solve your problem except to know where it was coming from. I
> > have intenially used the 53 mhz band as over all my years of using the ham
> > frequencies I have had many from all areas of the country and Canada have
> > never had inference on the 53mhz portion. Was reported many had witnessed or
> > personally experienced interference on the 50mhz portion.  Draw your own
> > conclusions. I have chosen the 53 mhz and never looked elsewhere yet.
> >
> >    del
> >        kb2joi - gen
> >           worked  220 countries
> >                rtty / cw / ssb
> >
> > ----- Original Message -----
> > From: "Paul Horan" <phoran at vvm.com>
> > To: <discussion at nsrca.org>
> > Sent: Tuesday, March 22, 2005 10:30 AM
> > Subject: 6 meter interference - channel 03
> >
> >
> >>    I am getting interference on Channel 03 , 50.86  Mhz.  The 50 mhz rc
> >> frequencies are in the CW portion 50-50.100 6meters.  My symptoms were a
> >> few holds, plane did no fly smoothly, and 2 failsafes - low throttle.
> >> Any ideas what are the best channels on 6 meters to stay away from
> >> interference ?  Of course, one
> >> solution is to go to the regular RC freqs.
> >>    Any ideas if this interference can be due to some other cause ?
> >> ThanksPaul Horan
> >> KC5NF
> >> AMA 57131
> >> NSRCA 3606
> >> =================================================
> >> To access the email archives for this list, go to
> >> http://lists.f3a.us/pipermail/nsrca-discussion/
> >> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> >> and follow the instructions.
> >>
> >>
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 


-- 
Jay Barcelo
www.ScaleAerobatics.com
www.jaybarcelo.com
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.