JR3421 gears

[Bob Pastorello]

Guys, buy the nylon gear sets that Dave/Troy referred to;  they are in 
stock, and work... I've done about 6 conversions.  Never a problem.

Bob Pastorello
NSRCA 199  AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


----- Original Message ----- 
From: "Keith Black" <tkeithb at comcast.net>
To: <discussion at nsrca.org>
Sent: Tuesday, March 22, 2005 2:44 PM
Subject: Re: JR3421 gears


Summer 2004 I sent a set of 3421's in for service as they had become very 
loose. I asked that they convert them to 3421SA's. After about three months 
of waiting for gears to be available they just sent me a new set of 
3421SA's. I thought this was awesome service from Horizon (other than not 
having the gears in stock). But it begs the question of if you can swap the 
gears as Troy has suggested why couldn't/wouldn't Horizon just us the 
JRPSG321 gear set? In my case was it necessary to swap the metal gear since 
there was slop?

Then again a couple of months I sent in a pair of 9411's with minimal 
mileage to swap them out for 9411SA's. This also took over a month because 
Horizon didn't have the correct gear set in stock.

I'm still not sure I fully understand the issues involved. If it's as easy 
as using the JRPSG321 gear set then why all the delays?

Keith Black
  ----- Original Message ----- 
  From: Daniel J. Hamlett
  To: discussion at nsrca.org
  Sent: Tuesday, March 22, 2005 2:19 PM
  Subject: Re: JR3421 gears


  I have been waiting for about 6 months now for a set of them for myself. 
Hope that you got a lot of patience.  ;-)

  Dan

  Brian Billings wrote:
    Anyone know where I can get some gears to convert my 3421's to 3421sa, 
they seem to be unavailable everywhere I call. 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.