6 meter interference - channel 03

Bill Glaze billglaze at triad.rr.com
Tue Mar 22 12:04:48 AKST 2005


Yeah; I happened to be on a layover there when the river caught fire.  
When water burns what do you use to put it out? 

Ron Van Putte wrote:

>
> On Mar 22, 2005, at 10:34 AM, Atwood, Mark wrote:
>
>> Cleveland...  NO comments from the peanut gallery either...Eric this
>> means you. :)
>
>
> Well geez!  Coulda been worse; coulda been Erie, PA.  I think that was 
> where the lake caught fire. <VBG>
>
> Ron Van Putte
>
>>
>>
>> -----Original Message-----
>> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
>> On Behalf Of Richard Strickland
>> Sent: Tuesday, March 22, 2005 11:25 AM
>> To: discussion at nsrca.org
>> Subject: Re: 6 meter interference - channel 03
>>
>> Where ARE you guys?
>>
>> Richard
>> ----- Original Message -----
>> From: "Atwood, Mark" <atwoodm at paragon-inc.com>
>> To: <discussion at nsrca.org>
>> Sent: Tuesday, March 22, 2005 10:12 AM
>> Subject: RE: 6 meter interference - channel 03
>>
>>
>>> Digital Tv.  Local channel 02 has basically wiped out our 53mhz band
>>> completely.  The FCC and the station are both aware that they're
>>> broadcasting outside their boundries, but given the aggressiveness
>>
>> with
>>
>>> which they want Digital TV up and running, the FCC has stated that
>>
>> they
>>
>>> will be lenient for a period of time to get things in order.  The
>>> station has been forthcoming with admitting that their bleeding over,
>>> but have yet to invest in the equipment needed to prevent it. It'll
>>> probably be a few years I'm told.
>>>
>>> Not sure if the same could be happening to 50mhz...  But that's the
>>> story on the 53 bands here.
>>>
>>> -Mark
>>>
>>> -----Original Message-----
>>> From: discussion-request at nsrca.org
>>
>> [mailto:discussion-request at nsrca.org]
>>
>>> On Behalf Of Paul Horan
>>> Sent: Tuesday, March 22, 2005 10:31 AM
>>> To: discussion at nsrca.org
>>> Subject: 6 meter interference - channel 03
>>>
>>>     I am getting interference on Channel 03 , 50.86  Mhz.
>>> The 50 mhz rc frequencies are in the CW portion 50-50.100 6meters.
>>> My symptoms were a few holds, plane did no fly smoothly, and 2
>>
>> failsafes
>>
>>> - low throttle.
>>> Any ideas what are the best channels on 6 meters to stay away from
>>> interference ?  Of course, one
>>> solution is to go to the regular RC freqs.
>>>     Any ideas if this interference can be due to some other cause ?
>>> ThanksPaul Horan
>>> KC5NF
>>> AMA 57131
>>> NSRCA 3606
>>> =================================================
>>> To access the email archives for this list, go to
>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>> To be removed from this list, go to
>>
>> http://www.nsrca.org/discussionA.htm
>>
>>> and follow the instructions.
>>>
>>> To access the email archives for this list, go to
>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>> To be removed from this list, go to
>>
>> http://www.nsrca.org/discussionA.htm
>>
>>> and follow the instructions.
>>>
>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> ================================================To access the email 
>> archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
>

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



More information about the NSRCA-discussion mailing list