6 meter interference - channel 03

[Ron Van Putte]

On Mar 22, 2005, at 10:34 AM, Atwood, Mark wrote:

> Cleveland...  NO comments from the peanut gallery either...Eric this
> means you. :)

Well geez!  Coulda been worse; coulda been Erie, PA.  I think that was 
where the lake caught fire. <VBG>

Ron Van Putte

>
>
> -----Original Message-----
> From: discussion-request at nsrca.org 
> [mailto:discussion-request at nsrca.org]
> On Behalf Of Richard Strickland
> Sent: Tuesday, March 22, 2005 11:25 AM
> To: discussion at nsrca.org
> Subject: Re: 6 meter interference - channel 03
>
> Where ARE you guys?
>
> Richard
> ----- Original Message -----
> From: "Atwood, Mark" <atwoodm at paragon-inc.com>
> To: <discussion at nsrca.org>
> Sent: Tuesday, March 22, 2005 10:12 AM
> Subject: RE: 6 meter interference - channel 03
>
>
>> Digital Tv.  Local channel 02 has basically wiped out our 53mhz band
>> completely.  The FCC and the station are both aware that they're
>> broadcasting outside their boundries, but given the aggressiveness
> with
>> which they want Digital TV up and running, the FCC has stated that
> they
>> will be lenient for a period of time to get things in order.  The
>> station has been forthcoming with admitting that their bleeding over,
>> but have yet to invest in the equipment needed to prevent it. It'll
>> probably be a few years I'm told.
>>
>> Not sure if the same could be happening to 50mhz...  But that's the
>> story on the 53 bands here.
>>
>> -Mark
>>
>> -----Original Message-----
>> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org]
>> On Behalf Of Paul Horan
>> Sent: Tuesday, March 22, 2005 10:31 AM
>> To: discussion at nsrca.org
>> Subject: 6 meter interference - channel 03
>>
>>     I am getting interference on Channel 03 , 50.86  Mhz.
>> The 50 mhz rc frequencies are in the CW portion 50-50.100 6meters.
>> My symptoms were a few holds, plane did no fly smoothly, and 2
> failsafes
>> - low throttle.
>> Any ideas what are the best channels on 6 meters to stay away from
>> interference ?  Of course, one
>> solution is to go to the regular RC freqs.
>>     Any ideas if this interference can be due to some other cause ?
>> ThanksPaul Horan
>> KC5NF
>> AMA 57131
>> NSRCA 3606
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> ================================================To access the email 
> archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.