Test do not answer

[Jim Ivey]

 Don't feel bad Mike most all futaba flyers use JR servos. They won't admit it like you did.
Man!!! that oughta get it started.

Jim Ivey
> 
> From: "Mike Hester" <kerlock at comcast.net>
> Date: 2005/03/05 Sat PM 08:16:50 EST
> To: <discussion at nsrca.org>
> Subject: Re: Re: Test do not answer
> 
> Futaba radio, JR servos. (And that's actually true)
> 
> -Mike
> 
> ----- Original Message ----- 
> From: "Keith (primary)" <khoard at midsouth.rr.com>
> To: <discussion at nsrca.org>
> Sent: Saturday, March 05, 2005 8:12 PM
> Subject: RE: Re: Test do not answer
> 
> 
> > What brand of radio were you using??
> >
> >
> >
> >
> > Keith L. Hoard
> > khoard at midsouth.rr.com
> > Cordova,  TN
> >
> >
> >
> > -----Original Message-----
> > From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] 
> > On
> > Behalf Of Mike Hester
> > Sent: Saturday, March 05, 2005 7:27 PM
> > To: discussion at nsrca.org
> > Subject: Re: Re: Test do not answer
> >
> > Well, the other day I was flying my all wood American plane with a 2 
> > stroke,
> >
> > and noticed something peculiar. At first I thought it might have been my
> > Lipo battery pack that I charged with a wall mart charger acting up, but
> > there was no smoke.
> >
> > So I went into the reverse avalanche, and noticed that my tips were 
> > binding
> > my servos hard because they are cut all the way through. As if that wasn't
> > bad enough, I broke my wing tube and realized that if my chin had been
> > smaller I may not have gotten quite the amount of torque and saved the
> > plane.
> >
> > So I realized I was alone because pattern is dying, and because my plane 
> > is
> > a full 2 meters I'm part of the problem. So I traded in my 2 meter for a
> > Kaos, dropped back and flew intermediate which is too hard, and then had a
> > flame out on my YS, which sucks. So then I landed too hard and my Lipo
> > exploded so I have no plane. But I still have the cool stickers!
> >
> > Anybody else have experiences like this?
> >
> > -Mike (that should about cover it)
> >
> > ----- Original Message ----- 
> > From: "Jim Ivey" <jivey61 at bellsouth.net>
> > To: <discussion at nsrca.org>
> > Sent: Saturday, March 05, 2005 6:58 PM
> > Subject: Re: Re: Test do not answer
> >
> >
> >> Start something. That will put a stop to quiet.
> >>
> >> Jim Ivey
> >>>
> >>> From: "Mike Hester" <kerlock at comcast.net>
> >>> Date: 2005/03/05 Sat PM 06:41:23 EST
> >>> To: <discussion at nsrca.org>
> >>> Subject: Re: Test do not answer
> >>>
> >>> Weekend. Always quiet.
> >>>
> >>> -Mike
> >>>   ----- Original Message ----- 
> >>>   From: BUDDYonRC at aol.com
> >>>   To: BUDDYonRC at aol.com
> >>>   Cc: discussion at nsrca.org
> >>>   Sent: Saturday, March 05, 2005 6:29 PM
> >>>   Subject: Re: Test do not answer
> >>>
> >>>
> >>>   In a message dated 3/5/2005 5:04:16 PM Central Standard Time, 
> >>> BUDDYonRC
> >
> >>> writes:
> >>>     No messages for a long while just checking
> >>>   another check not getting anything from the list or it is Quiet
> >>>   Buddy
> >>>
> >>
> >>
> >> =================================================
> >> To access the email archives for this list, go to
> >> http://lists.f3a.us/pipermail/nsrca-discussion/
> >> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> >> and follow the instructions.
> >>
> >
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> > 
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.