Manuver number 6 on P07 Schedule

Amram Privat amram at leshed.com
Sun Jun 19 06:21:11 AKDT 2005


Thanks Ron,
I will try it next time I am at field.
Amram


----- Original Message ----- 
From: "Ron Van Putte" <vanputte at cox.net>
To: <discussion at nsrca.org>
Sent: Sunday, June 19, 2005 4:10 PM
Subject: Re: Manuver number 6 on P07 Schedule


>
> On Jun 19, 2005, at 4:39 AM, Amram Private wrote:
>
>> Manuver number 6 on P07 Schedule is at center of box and is say: 45
>> degree down with 1 1/2  positive snap rolls - exit inverted.
>> No matter how hard I try I cannot snap/stall my model on 45 degree down
>> line. The best I get is a fast one and a half roll with nose pitching
>> As a result of full elevator on entry. Still the model does not really
>> stall.
>
> I had a similar problem with the snap on the 45 degree downline.  I kept 
> trying different combinations of aileron, elevator and rudder inputs, but, 
> either I couldn't  get a clean snap, or I buried it so deep in the snap 
> that I couldn't stop it at the right roll angle.  In addition, there was a 
> dramatic pitch change and I couldn't recover it on the 45 degree downline. 
> My flying buddy, John Fuqua, kept telling me I needed more elevator input. 
> Finally, after procrastinating a long time, I decided to give his idea a 
> try and added a LOT of elevator.  Wow!  The airplane snapped great.  It 
> stayed on the downline and I had much better control over the bank angle 
> at the exit.  But, now I had too much elevator for flying the rest of the 
> maneuvers, even with 80% exponential.  So, I added a flight condition for 
> the snap and everything's working great.
>
> Ron Van Putte
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
>
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.



More information about the NSRCA-discussion mailing list