OS140RX Bearings

[Jim Ivey]

Ron
SALT AIR.SEA BREEZES.

Jim Ivey
> 
> From: Ron Van Putte <vanputte at cox.net>
> Date: 2005/06/16 Thu PM 10:30:57 EDT
> To: discussion at nsrca.org
> Subject: Re: OS140RX Bearings
> 
> 
> On Jun 16, 2005, at 9:12 PM, Scott Anderson wrote:
> 
> > Ed's motor is NOT the FI..  I fly with him and it's true he just runs 
> > out the fuel after the last flight and no after run or anything.. 
> > motor still smooth...
> 
> Well, I have the same engine, run the same fuel (Morgan Pro Pattern 
> 25%), run the engine dry after every session, don't use after run oil 
> and I had bad bearings after 3 gallons of fuel.  Go figure.
> 
> Ron Van Putte
> 
> >> ----- Original Message -----
> >> From: vicenterc at comcast.net
> >> To: discussion at nsrca.org ; discussion at nsrca.org
> >> Cc: Ed Hartley
> >> Sent: Thursday, June 16, 2005 9:29 PM
> >> Subject: Re: OS140RX Bearings
> >>
> >> Is your OS the FI version?  That could be te reason since that 
> >> version comes already wint SS bearing. 
> >>  
> >> Vicente
> >>  
> >>> -------------- Original message --------------
> >>>
> >>> > I flew flight number 220 on the original bearings today! I run the 
> >>> engine
> >>> > dry at the end of the day! Cool Power Pattern 25%.
> >>> >
> >>> > Ed Hartley
> >>> > roho2 at rcpattern.com
> >>> >
> >>> > ----- Original Message -----
> >>> > From: "Verne Koester"
> >>> > To:
> >>> > Sent: Thursday, June 16, 2005 2:35 PM
> >>> > Subject: Re: OS140RX Bearings
> >>> >
> >>> >
> >>> > > Amram,
> >>> > > You're probably already on borrowed time. You need the rear 
> >>> bearing for
> >>> > > the EFI version of the 1.4 which is a sealed stainless bearing. 
> >>> The O.S.
> >>> > > part number is 29430010. You'll get between 300-500 flights with 
> >>> this
> >>> > > bearing. The original bearing is usually only good for 3 - 5 
> >>> gallons of
> >>> > > fuel.
> >>> > >
> >>> > > Verne
> >>> > >
> >>> > >
> >>> > > ----- Original Message -----
> >>> > > From: "Amram Private"
> >>> > > To:
> >>> > > Sent: Thursday, June 16, 2005 1:45 PM
> >>> > > Subject: OS140RX Bearings
> >>> > >
> >>> > >
> >>> > >> Hello to all
> >>> > >> My OS140RX already accumulated 15 hours and I am thinking of 
> >>> purchasing
> >>> > >> set of bearings to be ready for the days.
> >>> > >> I heard many opinions on this issue. I'll be happy if those who 
> >>> are
> >>> > >> experienced will advise...
> >>> > >> Thanks in advance to all answers
> >>> > >> Amram Leshed
> >>> > >>
> >>> > >> =================================================
> >>> > >> To access the email archives for this list, go to
> >>> > >> http://lists.f3a.us/pipermail/nsrca-discussion/
> >>> > >> To be removed from this list, go to 
> >>> http://www.nsrca.org/discussionA.htm
> >>> > >> and follow the instructions.
> >>> > >>
> >>> > >> List members email returned for mailbox full will be removed 
> >>> from the
> >>> > >> list.
> >>> > >>
> >>> > >>
> >>> > >
> >>> > > =================================================
> >>> > > To access the email archives for this list, go to
> >>> > > http://lists.f3a.us/pipermail/nsrca-discussion/
> >>> > > To be removed from this list, go to 
> >>> http://www.nsrca.org/discussionA.htm
> >>> > > and follow the instructions.
> >>> > >
> >>> > > List members email returned for mailbox full will be removed 
> >>> from the
> >>> > > list.
> >>> > >
> >>> > >
> >>> >
> >>> > =================================================
> >>> > To access the email archives for this list, go to
> >>> > http://lists.f3a.us/pipermail/nsrca-discussion/
> >>> > To be removed from this list, go to 
> >>> http://www.nsrca.org/discussionA.htm
> >>> > and follow the instructions.
> >>> >
> >>> > List members email returned for mailbox full will be removed from 
> >>> the list.
> >>> >
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.