Webra 160 help

[Grow Pattern]

The wrist pin is threaded on the inside so you use a bolt from the engine to 
pull it out. Then you can take out the con rod etc.

Regards,
Eric.


----- Original Message ----- 
From: "Wes Stafford" <2flyrc at 3states.net>
To: "NSRCA List" <discussion at nsrca.org>
Sent: Wednesday, June 01, 2005 8:39 AM
Subject: Webra 160 help


> Hello All,
>    I need help on changing the rear bearing on a Webra 160. How do you 
> remove the rod from the crank?
> Thanks,
> Wes
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.