Laser Alignment

[AtwoodDon at aol.com]

that's why they pay me the mediocre bucks!!!  Keep us posted.
 
D    
 
I love it when we get Bob all excited and he dashes off to try something I  
don't have the energy to go do.......  ;-))))))))
 
In a message dated 7/29/2005 4:23:42 P.M. Pacific Daylight Time,  
rcaerobob at cox.net writes:

Great idea, didn't think of it, will go try it and let ya'll know!
Thanks, DON!!!

Bob Pastorello
_www.rcaerobats.net_ (http://www.rcaerobats.net/) 
_rcaerobob at cox.net_ (mailto:rcaerobob at cox.net) 

----- Original Message ----- 
From:  _AtwoodDon at aol.com_ (mailto:AtwoodDon at aol.com)  
To: _discussion at nsrca.org_ (mailto:discussion at nsrca.org)  
Sent: Friday, July 29, 2005 6:19  PM
Subject: Re: Laser Alignment



Hey Bob, is there a way to narrow the laser line projection with a mask  or 
grid attached near to the laser lens.  Leaves a smaller apprature  (sp?) for 
the laser to project thru...  I think I saw something like  that in an article 
somewhere.....
 
Don
 
In a message dated 7/29/2005 4:16:23 P.M. Pacific Daylight Time, 
_rcaerobob at cox.net_ (mailto:rcaerobob at cox.net)  writes:

One  comment, after buying some of the "laser levels" out there....they can  
be HUGELY helpful, and I bought two from Wally World (cheapies) to  help with 
"general" alignment, and they work well.

As long as  you have no objection to the 3/32-1/8" wide line that they  
project.
If there was a way to make that line THINNER, they would  be REALLY cool. 
(But they ain't bad as they are, easy to adjust to  give 90* lines...handy)

Bob Pastorello









-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050729/5ec05987/attachment.html