Laser Alignment

[Bob Pastorello]

Great idea, didn't think of it, will go try it and let ya'll know!
Thanks, DON!!!

Bob Pastorello
www.rcaerobats.net
rcaerobob at cox.net
  ----- Original Message ----- 
  From: AtwoodDon at aol.com 
  To: discussion at nsrca.org 
  Sent: Friday, July 29, 2005 6:19 PM
  Subject: Re: Laser Alignment


  Hey Bob, is there a way to narrow the laser line projection with a mask or grid attached near to the laser lens.  Leaves a smaller apprature (sp?) for the laser to project thru...  I think I saw something like that in an article somewhere.....

  Don

  In a message dated 7/29/2005 4:16:23 P.M. Pacific Daylight Time, rcaerobob at cox.net writes:
    One comment, after buying some of the "laser levels" out there....they can 
    be HUGELY helpful, and I bought two from Wally World (cheapies) to help with 
    "general" alignment, and they work well.

    As long as you have no objection to the 3/32-1/8" wide line that they 
    project.
    If there was a way to make that line THINNER, they would be REALLY cool. 
    (But they ain't bad as they are, easy to adjust to give 90* lines...handy)

    Bob Pastorello

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050729/f073f11c/attachment.html