[SPAM] Re: Kavan starter dissassembly ?
Paul Horan
paul.horan at sbcglobal.net
Tue Jul 12 12:10:33 AKDT 2005
Dave,
I have it re-assembled except for lubing the gears.
What grease should I use on the planetary gears ? The main shaft is steel but the planetary gears are nylon, epoxy or plastic.
Thanks,
Paul
----- Original Message -----
From: Rick Wallace
To: discussion at nsrca.org
Sent: Tuesday, July 12, 2005 2:51 PM
Subject: [SPAM] Re: Kavan starter dissassembly ?
You can also make a 'spanner' out of a flat tip screwdriver you don't care much about -- a little dremel work to take out the center of the blade and you're there...
>From: DaveL322 at comcast.net
>Reply-To: discussion at nsrca.org
>To: discussion at nsrca.org
>Subject: Re: Kavan starter dissassembly ?
>Date: Tue, 12 Jul 2005 18:59:59 +0000
>
>I believe what you need is a "spanner" wrench to loosen the nuts at the back end of the starter - they are the bolts that appear at the front of the body. I made my own wrench from a piece of .125" aluminum. A skinny set of needle nose pliers might also work. You will have some fun putting it back together - the brushes are spring loaded against the commutator and need to be "pinned" open via the pinholes in plastic case/housing on the back end of the body.
>
>Good luck,
>
>Dave
>
>-------------- Original message --------------
>
> > My Kavan starter has some trash in the planetary gears. I have removed the
> > cone holder in the front but am at a loss how I
> > further dissassemble it. There appears to be two bolts that go from the rear to
> > the front of the body; but, I cannot find the screw
> > head.
> > Can anyone help ?
> > Thanks,
> > Paul
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> > List members email returned for mailbox full will be removed from the list.
> >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050712/4108960c/attachment.html
More information about the NSRCA-discussion
mailing list