3 blade prop

[randy10926 at comcast.net]

Not sure why but my Focus2 seems a little little than many others.  I also only carry 14 oz of fluel.

Randy

-------------- Original message -------------- 

I am running the 160 sized carbon fiber pipe with the Karl Muller header on 15% nitro.  No adjustments to pipe length, what Karl sent is what I use.  Tach not working at the moment, but to say vertical is unlimited is an understatement.

Randy

-------------- Original message -------------- 

> Randy - what pipe, length, nitro you using? What rpm you getting with that? 
> 
> My OS's will TURN the 13 pitch, but it is a strain I don't like to put on the 
> motor. 
> 
> Bob Pastorello 
> > 
> > From: randy10926 at comcast.net 
> > Date: 2005/07/11 Mon PM 03:11:37 EDT 
> > To: discussion at nsrca.org 
> > Subject: Re: 3 blade prop 
> > 
> > I would think so. 
> > 
> > My os160 have no problems with an APC 15.75X13 three blade. Since I heard the 
> pitch measure less for a Bolly than an APC, I wonder if a Bolly 18X10 would be 
> enough prop. 
> > 
> > Randy 
> > 
> > -------------- Original message -------------- 
> > 
> > Bob 
> > 
> > Do you think that a OS 1.60 will turn the Bolly 18x10 three blade ? 
> > 
> > Robert 
> > 
> 
> Bob Pastorello, El Reno, OK, USA 
> rcaerobob at cox.net 
> www.rcaerobats.net 
> 
> ================================================= 
> To access the email archives for this list, go to 
> http://lists.f3a.us/pipermail/nsrca-discussion/ 
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm 
> and follow the instructions. 
> 
> List members email returned for mailbox full will be removed from the list. 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050712/8ba2c784/attachment.html