[SPAM] Re: [SPAM] Re: servo horns

[Bob Pastorello]

Thanks, Ed.  Didn't know it was one of those "close, but no cigar" 
things.... I had been forced to use an Airtronics arm in the distant past 
once on my JR servo.... glad to have better info!

Bob Pastorello
www.rcaerobats.net
rcaerobob at cox.net
----- Original Message ----- 
From: "Ed Alt" <ed_alt at hotmail.com>
To: <discussion at nsrca.org>
Sent: Monday, July 11, 2005 8:31 PM
Subject: [SPAM] Re: [SPAM] Re: servo horns


> Bob:
> The number of teeth are the same, however you will get a sloppy fit when 
> you interchange them.  Try a machined, snug fitting aluminum arm meant for 
> a JR servo on an Airtronics and you will see what I mean. You can make it 
> work, but the tolerances are not the same.
>
> Ed
> ----- Original Message ----- 
> From: "Bob Pastorello" <rcaerobob at cox.net>
> To: <discussion at nsrca.org>
> Sent: Monday, July 11, 2005 9:22 PM
> Subject: Re: [SPAM] Re: servo horns
>
>
>> JR fits Airtronics/vice versa.
>>
>> Bob Pastorello
>> www.rcaerobats.net
>> rcaerobob at cox.net
>> ----- Original Message ----- 
>> From: "Ed Alt" <ed_alt at hotmail.com>
>> To: <discussion at nsrca.org>
>> Sent: Monday, July 11, 2005 8:15 PM
>> Subject: [SPAM] Re: servo horns
>>
>>
>>> Bill:
>>> No, JR is different from Futaba.  As far as I know, every single major 
>>> servo manufacturer has their own unique spline design.
>>> Ed
>>>
>>> ----- Original Message ----- 
>>> From: "Bill Pritchett" <phelps15 at comcast.net>
>>> To: <discussion at nsrca.org>
>>> Sent: Monday, July 11, 2005 8:56 PM
>>> Subject: servo horns
>>>
>>>
>>>> All:
>>>> Will Futaba horns fit ok on  JR servos?
>>>> Thanks
>>>> Bill
>>>>
>>>>
>>>> Bill Pritchett
>>>> 765-744-9322
>>>>
>>>> =================================================
>>>> To access the email archives for this list, go to
>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>> To be removed from this list, go to 
>>>> http://www.nsrca.org/discussionA.htm
>>>> and follow the instructions.
>>>>
>>>> List members email returned for mailbox full will be removed from the 
>>>> list.
>>>>
>>>>
>>> =================================================
>>> To access the email archives for this list, go to
>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>>> and follow the instructions.
>>>
>>> List members email returned for mailbox full will be removed from the 
>>> list.
>>>
>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> List members email returned for mailbox full will be removed from the 
>> list.
>>
>>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.