[SPAM] Re: [SPAM] Re: servo horns

[Ed Alt]

Bob:
The number of teeth are the same, however you will get a sloppy fit when you 
interchange them.  Try a machined, snug fitting aluminum arm meant for a JR 
servo on an Airtronics and you will see what I mean. You can make it work, 
but the tolerances are not the same.

Ed
----- Original Message ----- 
From: "Bob Pastorello" <rcaerobob at cox.net>
To: <discussion at nsrca.org>
Sent: Monday, July 11, 2005 9:22 PM
Subject: Re: [SPAM] Re: servo horns


> JR fits Airtronics/vice versa.
>
> Bob Pastorello
> www.rcaerobats.net
> rcaerobob at cox.net
> ----- Original Message ----- 
> From: "Ed Alt" <ed_alt at hotmail.com>
> To: <discussion at nsrca.org>
> Sent: Monday, July 11, 2005 8:15 PM
> Subject: [SPAM] Re: servo horns
>
>
>> Bill:
>> No, JR is different from Futaba.  As far as I know, every single major 
>> servo manufacturer has their own unique spline design.
>> Ed
>>
>> ----- Original Message ----- 
>> From: "Bill Pritchett" <phelps15 at comcast.net>
>> To: <discussion at nsrca.org>
>> Sent: Monday, July 11, 2005 8:56 PM
>> Subject: servo horns
>>
>>
>>> All:
>>> Will Futaba horns fit ok on  JR servos?
>>> Thanks
>>> Bill
>>>
>>>
>>> Bill Pritchett
>>> 765-744-9322
>>>
>>> =================================================
>>> To access the email archives for this list, go to
>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>>> and follow the instructions.
>>>
>>> List members email returned for mailbox full will be removed from the 
>>> list.
>>>
>>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> List members email returned for mailbox full will be removed from the 
>> list.
>>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
> 
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.